Mazda 2009 CX-7 Manual Download Page 160

Page: 160 / 454

Black plate (160,1)

Ignition Switch

Auxiliary key (with advanced key)

NOTE

When starting the engine using the advanced
key, refer to Starting the Engine (page 3-9).

When starting the engine with the
auxiliary key, perform the following
procedure.

1. Remove the auxiliary key from the

advanced key (page 3-15).

2. Make sure the start knob is in LOCK

position.

3. Remove the start knob by pulling it

outward while pressing the buttons on
both the left and right sides.

4. Insert the auxiliary key in the ignition

switch.

Ignition Switch Positions

With advanced
key

Without advanced
key

LOCK

The steering wheel locks to protect
against theft. Only in this position can the
key be removed.

5-2

Driving Your Mazda

Starting and Driving

CX-7_8Z60-EA-08D_Edition2 Page160
Friday, May 30 2008 5:27 PM

Form No.8Z60-EA-08D

Summary of Contents for 2009 CX-7







































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 CX-7

Reviews:

Related manuals for 2009 CX-7

Brands by name

Popular brands

Mazda 2009 CX-7, Manual

Search results

Summary of Contents for 2009 CX-7

Reviews:

Related manuals for 2009 CX-7

Brands by name

Popular brands