GLASS/WINDOWS/MIRRORS
09-12–12
Operation Prohibition/Stop Condition
•
When the following conditions are met before the operation, the exterior open/close function does not operate.
Also, if the conditions are met during the operation, the operation stops.
—
Either door/liftgate is open (when the door switch or cargo compartment light switch is ON)
—
The key is inserted in the steering lock (when the keyless switch is ON)
—
The push switch is pressed in or the start knob (ignition switch) is in a position other than the LOCK (with
advanced keyless system)
—
The transmitter is not in the reception area
End Of Sie
NG: WINDOW SWITCH
POWER WINDOW SWITCH CONSTRUCTION
id091200101300
•
Manual-open/close can be performed for all door glasses by operation of the power window main switches.
•
Manual-open/close can be performed for each specific window by operation of the switches at the all door
glasses.
•
Auto-open/close can be performed for front windows by operation of the power window main switches.
•
By locking the power cut switch, operation of the power window main switches for each door glasses and the
power window subswitches is inhibited.
•
A built-in P/W CM (power window control module) controls the power window system control based on the
pulse signals from the power window motor.
•
The position and movement direction of the window is stored at the time of vehicle delivery. Due to this, the
initial position setting must be performed after performing any of the following procedures:
—
Disconnecting the negative battery cable.
—
Removing the power window system power supply fuse.
—
Disconnecting the power window switch connector.
Block Diagram
End Of Sie
NG: WINDOW MOTOR
P/W CM
OPEN/CLOSE
OPEN/CLOSE
OPEN
CLOSE
POWER WINDOW MOTOR
(DRIVER SIDE)
POWER WINDOW MOTOR
( PASSENGER SIDE)
FRONT DOOR GLASS
(DRIVER SIDE)
FRONT DOOR GLASS
(PASSENGER SIDE)
PULSE 1
(HALL EFFECT SWITCH 1)
PULSE 2
(HALL EFFECT SWITCH 2)
WINDOW MOVEMENT
DISTANCE
WINDOW MOVEMENT
DIRECTION
POWER WINDOW
MAIN SWITCH
POWER WINDOW
SUBSWITCH
WINDOW MOVEMENT
DISTANCE
WINDOW MOVEMENT
DIRECTION
P/W CM
OPEN
CLOSE
PULSE 1
(HALL EFFECT SWITCH 1)
PULSE 2
(HALL EFFECT SWITCH 2)
ac9uun00000547
3423-1U-06H(09-12).fm 12 ページ 2006年11月21日 火曜日 午後5時37分
Summary of Contents for 2007 CX-9
