Mazda 2007 CX-9, Service Highlights

Page: 613 / 614

CONTROL SYSTEM
09-40–21
09-40
PID/Data Monitor Function
•
The PID/data monitor function is used for optionally selecting input/output signal monitor items preset in the
BCM and reading them out in real-time.
End Of Sie
C144C Steering phase C circuit signal is not sensed
Open circuit in wiring harness between BCM and steering angle
sensor
C144D Steering phase Z circuit signal is not sensed
Open circuit in wiring harness between BCM and steering angle
sensor
C1937 Steering wheel angle sensor offset failure BCM lost steering angle initialization position
U0073 CAN system communication error BCM or twisted pair malfunction
DTC No. Description Detection condition
PID/data monitor item
Unit/Condition
(Tester display)
Input/output part BCM terminal
CCNT_GE — Perform the DTC inspection. —
HOOD_SW OPEN/CLOSE
Hood latch switch
Note
•
“CLOSE” is displayed on vehicles with the theft-
deterrent system.
1B
T_GATE_SW OPEN/CLOSE Liftgate latch switch 6S
DRSW_REAR OPEN/CLOSE Rear door switch 6Q, 6R
DRSW_RF OPEN/CLOSE Front door latch switch (RH) 6M
DRSW_LF OPEN/CLOSE Front door latch switch (LH) 6O
HAZARD On/Off Hazard warning switch 5M
RWASH_SW On/Off Rear washer switch 5O
PRK_BRK On/Off Parking brake switch 1K
WPINT_REAR On/Off Rear wiper and washer switch (INT) 3Q
TURN_SW_R On/Off Turn switch (RH) 3G
TURN_SW_L On/Off Turn switch (LH) 3D
LLSW_D LOCK/UNLOCK Driver-side door lock-link switch 5K, 5N
CLS_LOCK LOCK/Off Door lock switches (lock) 1H, 3R
BRK_FLUID Low/Normal Brake fluid level sensor 1D
3423-1U-06H(09-40).fm 21 ページ ２００６年１１月２１日 火曜日 午後５時５１分