Mazda 2007 CX-9, Service Highlights

Page: 359 / 614

AIR BAG SYSTEM
08-10–7
08-10
Side Air Bag System
1. During a lateral collision to the vehicle, the crash sensors in the side air bag sensor No.1, side air bag sensor
No.2 and SAS control module detect the collision.
2. The level of impact detected by the crash sensor in the side air bag sensor is converted to an electrical signal
and sent to the SAS control module through the signal amplification circuit.
3. Simultaneously, the SAS control module crash sensor converts the level of impact detected to an electrical
signal.
4. The SAS control module processes the calculations for the three electrical signals at the output control circuit
and compares the value to a preset value.
5. The output control circuit determines the level of impact to the vehicle by the value from the crash sensors,
completes a side air bag module and curtain air bag module ignition circuit, and sends the deployment signal to
the air bag modules.
Side Air Bag Sensor System
•
To improve detection of an impact to the side of the vehicle, side air bag sensors have been placed in the front
and rear (No.1: Front, No.2: Rear)
SIDE AIR BAG
SENSOR NO. 2 SIDE AIR BAG
SENSOR NO. 1
CRASH
SENSOR CRASH
SENSOR
SAS CONTROL MODULE
CURTAIN AIR BAG
MODULE
SIDE AIR BAG
MODULE
CRASH
SENSOR
OUT CONTROL CIRCUIT
JUDGEMENT AND
SAFING CIRCUIT
ac9uun00000536
SIDE AIR BAG
SENSOR NO.1
SIDE AIR BAG
SENSOR NO.2
ac9uun00000110
3423-1U-06H(08-10).fm 7 ページ ２００６年１１月２２日 水曜日 午後２時５４分