Mazda 2007 CX-9, Service Highlights

Page: 119 / 614

ON-BOARD DIAGNOSTIC
02-02–1
02-02
02-02 ON-BOARD DIAGNOSTIC
ON-BOARD DIAGNOSTIC
SYSTEM OUTLINE
(TIRE PRESSURE
MONITORING SYSTEM) . . . . . . . . . . . . 02-02–1
Block Diagram . . . . . . . . . . . . . . . . . . . 02-02–2
ON-BOARD DIAGNOSTIC
SYSTEM FUNCTION
(TIRE PRESSURE
MONITORING SYSTEM) . . . . . . . . . . . . 02-02–3
Malfunction Detection Function . . . . . . 02-02–3
Malfunction Indication Function . . . . . . 02-02–3
Memory Function . . . . . . . . . . . . . . . . . 02-02–3
DTC Table . . . . . . . . . . . . . . . . . . . . . . 02-02–3
ON-BOARD DIAGNOSTIC SYSTEM
PID/DATA MONITOR FUNCTION
(TIRE PRESSURE
MONITORING SYSTEM) . . . . . . . . . . . . 02-02–4
ON-BOARD DIAGNOSTIC SYSTEM
ACTIVE COMMAND MODES FUNCTION
(TIRE PRESSURE
MONITORING SYSTEM) . . . . . . . . . . . . 02-02–5
ON-BOARD DIAGNOSTIC SYSTEM
FREEZE FRAME DATA
MONITOR FUNCTION
(TIRE PRESSURE
MONITORING SYSTEM) . . . . . . . . . . . . 02-02–6
ON-BOARD DIAGNOSTIC SYSTEM
EXTERNAL TESTER
COMMUNICATION FUNCTION
(TIRE PRESSURE
MONITORING SYSTEM) . . . . . . . . . . . . 02-02–7
External Tester
Communication Function . . . . . . . . . . 02-02–7
Serial Communication . . . . . . . . . . . . . . 02-02–7
DLC-2 CONSTRUCTION . . . . . . . . . . . . . 02-02–7
End of Toc
NG: TIRE PRESSURE MONITORING SYSTEM
ON-BOARD DIAGNOSTIC SYSTEM OUTLINE (TIRE PRESSURE MONITORING SYSTEM)
id020200100100
•
The on-board diagnostic system consists of a malfunction detection system that detects abnormalities in input/
output signals when the ignition switch is at the ON position, a data monitor function that reads out specified
input/output signals, and an active command modes function that execuse the wheel unit ID registration.
•
The Data Link Connector 2 (DLC-2), which groups together all the connectors used for malfunction diagnosis
into a single location, has been adopted, thereby improving serviceability. Diagnosis is performed by
connecting the Mazda Modular Diagnostic System (M-MDS) to the DLC-2.
•
In addition to DTC read-out, the Mazda Modular Diagnostic System (M-MDS) is used to clear DTCs using the
display screen of the diagnostic tester, and to access the data monitor, providing enhanced malfunction
diagnosis and improved serviceability.
3423-1U-06H(02-02).fm 1 ページ ２００６年１１月２１日 火曜日 午後５時５分