![background image](http://html1.mh-extra.com/html/mauell/me30-infobox-connect/me30-infobox-connect_manual_1742264012.webp)
ME30 infobox connect
12
infobox connect
The infobox device has two data areas that are reserved for configuration and parameter data
and for user-specific programming:
1. Default data (factory settings)
2. User data
When the infobox device is delivered, the user data record and the default data record are
identical. The user data record can be modified as follows:
Changes in the device configuration and device parameters (e.g., write and save a parameter
record in the infobox device).
A read access to the data record of the device always provides you with the contents of the
user data record. You may always return to the default data record by resetting the device to
the original factory settings. The user data record will then be identical again with the default
settings. (
Careful: Such a reset will delete your user data!)
It is good practice to save your user data from time to time in the form of a file using the
relevant PC tool. You can always fall back on it if you have reset the infobox device
inadvertently.
Procedure:
• Configuration and parameter data
1. Establish communication between your PC and the infobox device.
2. Start the PC tool for specifying the configuration and parameters.
3. Open the file that contains the user data.
4. Start downloading this file into the infobox device.
5. Wait until the download procedure is completed (progress is indicated by a progress bar;
completion is indicated by an acoustic signal).
• Network configuration data
1. Establish communication between your PC and the infobox device.
2. Start the PC network tool.
3. Open the file that contains the user data.
4. Call “Load configuration.”
5. Save the data (Option: Save all parameters).
6. Start downloading this file into the infobox device.
7. Wait until the download procedure is completed (progress is indicated by a progress bar;
completion is indicated by an acoustic signal).