manualshive.com logo in svg

Mauell ME30 infobox connect, Manual, Page: 38 / 40

Share
Download
Mauell ME30 infobox connect Manual Download Page 38

ME30 infobox connect

38

infobox connect

Options for infobox connect

Option

Available Device Types

Plug-type terminals with 

• All device types

screw connection

Backlight display insteat of LED

• Up to 16 messages for all supply voltage types

(red/green backlight for 

• 24 messages and more for DC 24 V supply voltages 

*

message label)

Relay option for message-

• LED versions: up to 16 messages for all supply voltages

Signal conveying

• LED versions: 24 messages and more for 24 V DC

(one relay contact for 

supply voltage 

*

every message input)

• Backlight versions: up to 8 messages for all supply 

voltages

• Backlight versions: 16 messages and more for 24 V DC

supply voltage 

*

Accessories for infobox connect

*

: external Supply voltage modules for the conversion to 24 V DC for supply voltages

greater than 24 V DC

Supply Voltage

Type

Id. Number

DC: 110 V, 220 V
AC: 127 V, 230 V

U83 230A

30-96-283

DC: 48 V, 60 V
AC: 48 V

U84 60A

30-96-284

Uninterruptable power supply

Type

Id. Number

For all device types (supply via emergency supply input):

Accu module for DIN rail mounting 12 V DC 1.2 Ah

06-22-639

(without load function and without load status monitoring)

For 24 V DC devices (supply via voltage supply input):

UPS U81 230B, AC 230 V / DC 28 V / 0.7 A / 1.2 Ah

30-96-282

(with load function and load status monitoring)

Summary of Contents for ME30 infobox connect









































Reviews:

No comments