line, in the format:
“DestNLvl1”:”SrcLvl1”,”DestNLvl2”:”SrcLvl2”,...
Example
>S1
“Dest1”:”Src4”,”Dest1”:”Src4”
“Dest2”:”Src3”,”Dest2”:”Src3”
“Dest3”:”Src2”,”Dest3”:”Src2”
“Dest4”:”Src1”,”Dest4”:”Src4”
The example above is output from a two level (Video and Audio for example) 4x4 matrix with sources routed in
reverse order, except destination 4, which has a 2nd level break away which is routed from source 4.
5.47 SerBaud Command
MSC-GCP2U32 only
Query or assign the serial port baud rate. The default value is 115200. This value is stored and recalled on
power up.
Command
Description
SerBaud
Query the current serial port baud rate.
SerBaud BAUD
Set the serial port baud rate.
Examples
>SerBaud
115200
>SerBaud 9600
>
The first example command queries the serial baud rate value which is the default of 115200 and the second
command sets it to 9600 baud.
5.48 SerProto Command
MSC-GCP2U32 only
Query or assign the serial protocol. The only available option is currently the case insensitive value "Mascot",
however additional control protocols may be added in the future. Value is stored and recalled on power up.
Command
Description
SerProto
Query the protocol used on the serial port.
SerProto PROTO
Assign the protocol used on the serial port (the only valid value is
Page 64 of 75
©
2013 Matrix Switch Corporation
www.matrix-switch.tv