Dest
button again.
3. Press the
Source
button which will activate Source Mode, buttons
0
through
9
,
Source
,
Cancel
and
Take
will flash awaiting further input (Source Mode can be canceled by pressing the
Cancel
button or
after 20 seconds of inactivity).
4. Key-in the desired source of the crosspoint change using buttons
0
through
9
and the currently selected
source will update accordingly on the display. To re-enter the source number, press the
Source
button
again.
5. Press the
Take
button to complete the crosspoint connection or press
Cancel
to keep the existing
connection and return to the
Routing
page.
2.3 Routing - Multi Level Audio/Video
When controlling a routing switcher with
multiple levels, such as Video and Audio, the
Routing display is depicted as in Figure 6.
For each destination the destination labels and
the currently connected source numbers and
labels for both levels are shown.
The
Navigation
buttons can be used to change
the currently selected item and to scroll through multiple pages if applicable.
2.3.1 Changing a Multi Level Crosspoint
There are 2 methods which can be used to change a matrix crosspoint connection called
Navigation Method
and
Key-In Method
described below.
Both methods utilize the
Audio
and
Video
buttons to toggle which levels of the crosspoint
will be modified by crosspoint changes. If the
Video
button is toggled on, only the 1
st
level will
be changed. If the
Audio
button is toggled on,
only the 2
nd
level will be changed. If both
Video
and
Audio
buttons are toggled off, then both
levels will be changed.
Navigation Method
Page 17 of 75
©
2013 Matrix Switch Corporation
www.matrix-switch.tv
Figure 6: Multi Level Routing
Figure 7: Routing Select Multi Level Source