1. Navigate to the desired destination item using the
Navigation
buttons.
2. Press the
Select
button to activate
Source Mode
.
3. The
Select Source
page is shown with the currently connected source highlighted (Figure 7 - shown
with both Video and Audio levels active).
4. Toggle on or off the
Video
and
Audio
buttons to the desired setting of the levels to be changed, if
necessary. The
Select Source
levels displayed will be updated accordingly.
5. Navigate to the source which is intended to connect to the active destination levels.
6. Press the
Select
or
Take
buttons to complete the crosspoint connection or press
Cancel
to keep the
existing connection and return to the
Routing
page.
Key-In Method
1. Press the
Dest
button which will activate Destination Mode, buttons
0
through
9
,
Dest
and
Cancel
will
flash awaiting further input (Destination Mode can be canceled by pressing the
Cancel
button or after 20
seconds of inactivity).
2. Key-in the desired destination of the crosspoint change using buttons
0
through
9
and the currently
selected destination will update accordingly on the display. To re-enter the destination number, press the
Dest
button again.
3. Press the
Source
button which will activate Source Mode, buttons
0
through
9
,
Source
,
Cancel
and
Take
will flash awaiting further input (Source Mode can be canceled by pressing the
Cancel
button or
after 20 seconds of inactivity).
4. Key-in the desired source of the crosspoint change using buttons
0
through
9
and the currently selected
source will update accordingly on the display. To re-enter the source number, press the
Source
button
again.
5. Toggle on or off the
Video
and
Audio
buttons to the desired setting of the levels to be changed, if
necessary. The Select Source levels displayed will be updated accordingly.
6. Press the
Take
button to complete the crosspoint connection or press
Cancel
to keep the existing
connection and return to the
Routing
page.
2.4 Presets
Matrix Switch Corporation routing switchers can
store up to 10 presets.
The MSC-GCP2U32 can recall a preset or store
the current entire routing matrix to a preset on
the router.
At this time, the MSC-GCP2U32 does not
support storing partial presets or building
Page 18 of 75
©
2013 Matrix Switch Corporation
www.matrix-switch.tv
Figure 8: Presets