manualshive.com logo in svg

Matrix Switch Corporation MSC-GCP2U32, Product Manual, Page: 62 / 75

Share
Download
Matrix Switch Corporation MSC-GCP2U32 Product Manual Download Page 62

PView

Display all presets.

PView PRESET

Display a single PRESET.

Example on a 16x4 system with 2 levels

>PView 1

1:1,1 2:2,2 3:6,7 4:0,-
>

The above example shows that Preset 1 would cause Destination 1 to be connected to Source 1 for both levels, 
Destination 2 to be connected to Source 2 for both levels, Destination 3 to be connected to Source 6 for Level 1 
and Source 7 for Level 2 (break away) and Destination 4 to be Muted for Level 1 and “No Change” would be 
made for Level 2.

5.42 Quit Command

MSC-GCP2U32 only

Closes the current Mascot TCP/IP connection.  Only applicable to persistent TCP/IP Mascot client connections, 
such as telnet.

Command

Description

Quit

Close the current TCP/IP connection (if applicable).

Examples

>Quit

<Connection closed>

5.43 Reboot Command

Instructs the system to reboot, which is done after a brief delay.

5.44 ReclkDis Command

Routers only - Protocol Version: 2.1

Command for disabling or enabling SDI reclockers.  Not all router systems support this option.  Value is saved 
and recalled on power up.

Command

Description

ReclkDis

Query current value of reclocker disable.

ReclkDis 0 | 1

Enable or disable reclockers (0 or 1 respectively).

Examples

Page 62 of 75

©

 2013 Matrix Switch Corporation

www.matrix-switch.tv

Summary of Contents for MSC-GCP2U32












































































Reviews:

No comments