2 LCD User Interface
2.1 Overview
The MSC-GCP2U32 LCD control panel interface consists of a QVGA LCD screen and 32 buttons as depicted
in Figure 1.
2.1.1 Modes and Scopes
Operation of the LCD user interface depends on the current mode of the panel. Modes are activated by specific
buttons or by navigating and activating items listed on the display. Additionally Scopes describe overlapping
functionality that can be active simultaneously with the current Mode. Table 1 lists Modes and Scopes of the
LCD user interface.
Mode/Scope
Description
Global
Buttons in the Global scope are always available, regardless of the current panel Mode.
Navigation
The Navigation scope is active when the Edit scope is not active and one or more selectable
items are displayed.
Edit
The Edit scope is active when editing a configuration parameter.
Preset
Preset mode is active when selecting a preset number to recall from or save to.
Destination
Destination mode is active when selecting a destination for a crosspoint selection operation.
Source
Source mode is active when selecting a source for a crosspoint selection operation.
Table 1: Modes and Scopes
2.1.2 Buttons
As seen in Table 2 the functionality of the user interface buttons depend on the current Mode and Scope of the
panel. Buttons are shown colored by functionality and scope in Figure 2 with the following key:
Page 13 of 75
©
2013 Matrix Switch Corporation
www.matrix-switch.tv
Figure 1: MSC-GCP2U32 LCD Interface