arbitrary presets not based on the current routing matrix using the LCD interface. However, the web page
interface or command protocol can be utilized for these purposes.
2.4.1 Recalling a Preset
Presets can be recalled using the following procedure:
1. Press the
Preset
button which will bring up the
Select Preset
page as seen in Figure 8. Pressing the
Cancel
button or 20 seconds of inactivity will cancel
Preset Mode
and return to the
Routing
page.
2. Navigate to the desired preset using the
Navigation
buttons.
3. Press the
Take
or
Select
buttons to recall the preset to the current matrix routing state.
2.4.2 Store a Preset
The entire routing matrix state can be stored to a preset using the following procedure:
1. Press the
Preset
button which will bring up the
Select Preset
page as seen in Figure 8. Pressing the
Cancel
button or 20 seconds of inactivity will cancel the Preset mode.
2. Navigate to the desired preset using the
Navigation
buttons.
3. Press the
Save
button to store the current matrix routing state to the selected preset.
2.5 Menu
The menu pages are used for accessing other
areas of the MSC-GCP2U32, including device
information and configuration.
To access the menu at any time, press the
Menu
button which will display the last used menu
page (Main Menu by default, as seen in Figure
9).
Navigation within menus is identical to other areas of the interface, including the
Navigation
buttons,
Number
buttons and
Select
.
2.6 Information
The
Information
page is accessed from the
Main Menu
and shows the current Software Version. To return to
the
Main Menu
press the
Menu
button. Pressing
Cancel
will return to the Routing page.
Page 19 of 75
©
2013 Matrix Switch Corporation
www.matrix-switch.tv
Figure 9: Main Menu