DNSSec
Query secondary DNS server IP address.
DNSSec IP
Set secondary DNS server IP address.
Examples
>DNSSec
0.0.0.0
>DNSSec 10.0.0.1
>
Query the secondary DNS server IP address, followed by assigning it.
5.18 E Command
Routers and MSC-GCP2U32 only
NOTE:
On the MSC-GCP2U32 this command executes within the context of the current matrix profile selected
with the
Profile Command
.
Query or assign matrix routing changes echo. A value of 0 disables this feature. A value of 1 will cause all
matrix routing changes to be echoed in the form of an X command: “Xd,s[,l]”. Where 'd' is the destination
number, 's' is the source number and 'l' is the optional level number. This is useful for diagnostic purposes or
automation software which would like to receive synchronous matrix routing state updates.
NOTE:
Enabling this feature may slow down the system significantly during excessive matrix routing changes
(especially when enabled on the serial port). Also of note is that this option takes effect only while the system
remains powered (serial port) or for the duration of the connection (TCP/IP telnet sessions). This command is
not supported by the HTTP web command interface.
Command
Description
E
Query matrix echo enable.
E 0 | 1
Set matrix echo enable (0 to disable, 1 to enable).
Examples to query and then enable matrix echo
>E
0
>E 1
>
5.19 Firmware Command
Query the system firmware version.
Page 48 of 75
©
2013 Matrix Switch Corporation
www.matrix-switch.tv