manualshive.com logo in svg

Matrix Switch Corporation MSC-GCP2U32, Product Manual, Page: 27 / 75

Share
Download
Matrix Switch Corporation MSC-GCP2U32 Product Manual Download Page 27

limited to 8 characters including spaces.  Multi-level routers will have columns for Video and Audio Sources 
and Destinations.  Single level routers will have a column for Source labels and one for Destination labels.  On 
multi-level routers, secondary levels can be left blank to use the same label as the first level.  Presets can also be
assigned label names.  Click the 

Save

 button to save changes that have been made.

3.5 Config Tab

Figure 4 depicts the Config Tab as seen on a Router system beginning with Carina Series Firmware 5.3.0.  
Configuration fields vary depending on router features, firmware version and if the device is a Remote Panel.

NOTE:

 After changing any configuration settings click the 

Save

 button.  All 

Network Settings

 changes require

a Reboot of the device in order to take effect.  After clicking 

Save

, click the 

Reboot

 button to restart the device.

Remember to enter a new IP address into your Web browser's Location bar, if the device's IP address has 
changed.

Page 27 of 75

©

 2013 Matrix Switch Corporation

www.matrix-switch.tv

Figure 18: Config Tab

Summary of Contents for MSC-GCP2U32












































































Reviews:

No comments