MARUTI SUZUKI CELERIO Manual Download Page 185

Page: 185 / 316

7-12

INSPECTION AND MAINTENANCE

76MH1-74E

Air Cleaner

If the air cleaner is clogged with dust, there

will be greater intake resistance, resulting

in decreased power output and increased

fuel consumption.

76MH0A109

Unclamp the upper clamps, and remove

the element from the air cleaner case. If it

appears to be dirty, replace it with a new

one.

Spark Plugs

76MH0A109

68KH072

For nickel spark plugs (traditional type):

You should inspect spark plugs periodically

for carbon deposits. When carbon accu-

mulates on a spark plug, a strong spark

may not be produced. Remove carbon

deposits with a wire or pin and adjust the

spark plug gap.
To access the spark plugs:

1) Unclamp and remove the bolt, then

remove the air cleaner case.

2) If necessary, disconnect the coupler (1)

while pushing the release lever.

3) Remove the bolts.

4) Pull the ignition coils out.

NOTE:

When installation, make sure the wires,

couplers, sealing rubber of top cover and

washers, are correctly returned in place.

78K179

EXAMPLE

(1)

EXAMPLE

Correct

Wrong

EXAMPLE

Summary of Contents for CELERIO





























































































































































































































































































































Search results

Summary of Contents for CELERIO

Reviews:

Related manuals for CELERIO

Brands by name

Popular brands

MARUTI SUZUKI CELERIO, Manual

Search results

Summary of Contents for CELERIO

Reviews:

Related manuals for CELERIO

Brands by name

Popular brands