MARUTI SUZUKI CELERIO Manual Download Page 37

Page: 37 / 316

2-18

BEFORE DRIVING

76MH1-74E

80JS029

To lengthen, release the latch plate from

the buckle, pull the latch plate (adjuster) in

the direction of the arrow, at right angles to

the belt. The latch plate should then be

refitted into the buckle and the belt tight-

ened as previously described.
To unfasten the belt, press the release but-

ton on the buckle catch.

80JS031

NOTE:

To identify the center seat belt buckle and

latch plate in the rear seat, “CENTER” is

marked on the buckle and latch plate of the

center lap belt. The buckles are designed

so a latch plate cannot be inserted into the

wrong buckle.

Driver’s Seat Belt Reminder

With tachometer

76MH028

Without tachometer

76MS013

When the driver does not buckle his or her

seat belt, the driver’s seat belt reminder

light in the instrument cluster will come on

TO LOOSEN

Right angle

EXAMPLE

CENTER

EXAMPLE

Summary of Contents for CELERIO





























































































































































































































































































































Search results

Summary of Contents for CELERIO

Reviews:

Related manuals for CELERIO

Brands by name

Popular brands

MARUTI SUZUKI CELERIO, Manual

Search results

Summary of Contents for CELERIO

Reviews:

Related manuals for CELERIO

Brands by name

Popular brands