MARUTI SUZUKI CELERIO, Manual, Page: 38 / 316

2-19
BEFORE DRIVING
76MH1-74E
or blink and a buzzer will sound as a
reminder to the driver to buckle his or her
seat belt. For more details, refer to the
explanation below.
If the driver’s seat belt remains unbuckled
when the ignition switch is turned to “ON”
position. The reminder works as follows:
1) The driver’s seat belt reminder light will
come on.
2) After the vehicle’s speed has reached
about 15 km/h, the driver’s seat belt
reminder light will blink and a buzzer
will sound for about 95 seconds.
3) After step 2) has finished, the reminder
light will remain on until the driver’s seat
belt is buckled.
If the driver has buckled his or her seat belt
and later unbuckles the seat belt, the
reminder system will be activated from
step 1) or step 2) according to the vehicle’s
speed. When the vehicle’s speed is below
about 15 km/h, the reminder will start from
step 1). When the vehicle’s speed is above
about 15 km/h, the reminder will start from
step 2).
The reminder will be automatically can-
celed when the driver’s seat belt is buckled
or the ignition switch is turned off.
Seat Belt Hanger
76MH0A028
WARNING
It is absolutely essential that the
driver and passengers fasten their
seat belts at all times. Persons who
are not fastening seat belts have a
much greater risk of injury if an acci-
dent occurs. Make a regular habit of
buckling your seat belt before putting
the key in the ignition or pressing the
engine switch.
NOTICE
• When you move a seatback, make
sure the latch plate is inserted into
the slit (1) securely so the seat
belts are not caught by the seat-
back, seat hinge, or seat latch. This
helps prevent damage to the belt
system.
• Make sure the belt webbing is not
twisted.
(1)
EXAMPLE