MARUTI SUZUKI CELERIO Manual Download Page 190

Page: 190 / 316

7-17

INSPECTION AND MAINTENANCE

76MH1-74E

Parking Brake

54G109

Ratchet tooth specification “b”:

4th – 9th

Lever pull force (1):

200 N (20 kg, 45 lbs)

Check the parking brake for proper adjust-

ment by counting the number of clicks

made by the ratchet teeth as you slowly

pull up on the parking brake lever to the

point of full engagement. The parking

brake lever should stop between the speci-

fied ratchet teeth and the rear wheels

should be securely locked. If the parking

brake is not properly adjusted or the

brakes drag after the lever has been fully

released, have the parking brake

inspected and/or adjusted by your autho-

rised Maruti Suzuki workshop.

Steering

68LM708

Steering wheel play “c”:

0 – 30 mm (0.0 – 1.2 in.)

Check the play of the steering wheel by

gently turning it from left to right and mea-

suring the distance that it moves before

you feel slight resistance. The play should

be between the specified values.
Check that the steering wheel turns easily

and smoothly without rattling by turning it

all the way to the right and to the left while

driving very slowly in an open area. If the

amount of free play is outside the specifi-

cation or you find anything else to be

wrong, an inspection must be performed

by your authorised Maruti Suzuki work-

shop.

Tires

68KH075

The front and rear tire pressure specifica-

tions for your vehicle are listed on the Tire

Information Label. Both the front and rear

tires should have the specified tire pres-

sure.

Note that the value does not apply to the

compact spare tire, if equipped.

Tire Inspection

Inspect your vehicle’s tires at least once a

month by performing the following checks:
1) Measure the air pressure with a tire

gauge. Adjust the pressure if neces-

sary. Remember to check the spare

tire, too.

(1)

‘’b’’

EXAMPLE

“c”

EXAMPLE

Summary of Contents for CELERIO





























































































































































































































































































































Search results

Summary of Contents for CELERIO

Reviews:

Related manuals for CELERIO

Brands by name

Popular brands

MARUTI SUZUKI CELERIO, Manual

Search results

Summary of Contents for CELERIO

Reviews:

Related manuals for CELERIO

Brands by name

Popular brands