MARUTI SUZUKI CELERIO Manual Download Page 141

Page: 141 / 316

5-36

OTHER CONTROLS AND EQUIPMENT

76MH1-74E

Notes on iPod

Supported iPod

• iPod

touch (5th generation)

• iPod

touch (4rd generation)

• iPod

touch (3rd generation)

• iPod

touch (2nd generation)

• iPod

touch (1st generation)

• iPod

classic

• iPod

nano (7th generation)

• iPod

nano (6th generation)

• iPod

nano (5th generation)

• iPod

nano (4th generation)

• iPod

nano (3rd generation)

• iPod

nano (2nd generation)

• iPod

nano (1st generation)

• iPod

(5th generation)

• iPhone

3GS

• iPhone

* Some functions may not be available

depending on the model of iPod

* iPod

is a trademark of Apple Inc., regis-

tered in the U.S. and other countries.

* iPhone

is a trademark of Apple Inc.,

registered in the U.S. and other coun-

tries.

* Apple is not responsible for the opera-

tion of this device or its compliance with

safety and regulatory standards.

iPod

connection

• Make sure to detach the iPod

after

pressing the engine switch to change the

ignition switch is in “LOCK” position. The

iPod

may not be shut down when it is

being connected and may result in bat-

tery depletion.

• Please do not connect iPod

accesso-

ries such as an iPod

remote control or

headphones while connecting the iPod

with the unit. The unit may not operate

correctly.

Summary of Contents for CELERIO





























































































































































































































































































































Search results

Summary of Contents for CELERIO

Reviews:

MARUTI SUZUKI CELERIO, Manual, Page: 141 / 316

Search results

Summary of Contents for CELERIO

Reviews: