manualshive.com logo in svg

MARUTI SUZUKI CELERIO, Manual, Page: 63 / 316

Share
Download
MARUTI SUZUKI CELERIO Manual Download Page 63

2-44

BEFORE DRIVING

76MH1-74E

NOTE:

Because the disc brake system is self-

adjusting, the fluid level will drop as the

brake pads become worn. Replenishing

the brake fluid reservoir is considered nor-

mal periodic maintenance.
NOTE:

(Parking Brake Reminder Buzzer) (if

equipped)

A buzzer sounds intermittently to remind

you to release the parking brake if you

start the vehicle without releasing the park-

ing brake. Make sure that the parking

brake is fully released and the brake sys-

tem warning light turns off.

Seat Belt Warning Light 

(if equipped)

60G049

This light blinks as a reminder until the

driver’s seat belt is buckled.
For details about the seat belt reminder,

refer to “Seat Belts and Child Restraint

Systems” in this section.

“AIR BAG” Light

63J030

This light blinks or comes on for several

seconds when the ignition switch is turned

to the “ON” position so you can check if the

light is working.
The light will come on and stay on if there

is a problem in the air bag system or the

seat belt pretensioner system (if

equipped).

WARNING

If any of the following conditions

occur, you should immediately ask

your an authorised Maruti Suzuki

workshop to inspect the brake sys-

tem.

• If the brake system warning light

does not go out after the engine

has been started and the parking

brake has been fully released.

• If the brake system warning light

does not come on when the igni-

tion switch is turned to the “ON”

position.

• If the brake system warning light

comes on at any time during vehi-

cle operation.

WARNING

If the “AIR BAG” light does not blink

or come on briefly when the ignition

switch is turned to the “ON” position,

stays on for more than 10 seconds,

or comes on while driving, the air bag

system or seat belt pretensioner (if

equipped) may not work properly.

Have both systems inspected by an

authorised Maruti Suzuki workshop.

Summary of Contents for CELERIO





























































































































































































































































































































Reviews:

No comments