MARUTI SUZUKI CELERIO Manual Download Page 191

Page: 191 / 316

7-18

INSPECTION AND MAINTENANCE

76MH1-74E

52KM110

(1) Tread wear indicator

(2) Indicator location mark

2) Check that the depth of the tread

groove is more than 1.6 mm (0.06 in.).

To help you check this, the tires have

molded-in tread wear indicators in the

grooves. When the indicators appear

on the tread surface, the remaining

depth of the tread is 1.6 mm (0.06 in.)

or less and the tire should be replaced.

3) Check for abnormal wear, cracks and

damage. Any tires with cracks or other

damage should be replaced. If any tires

show abnormal wear, have them

inspected by your authorised Maruti

Suzuki workshop.

4) Check for loose wheel nuts.

5) Check that there are no nails, stones or

other objects sticking into the tires.

WARNING

• Air pressures should be checked

when the tires are cold or you may

get inaccurate readings.

• Check the inflation pressure from

time to time while inflating the tire

gradually, until the specified pres-

sure is obtained.

• Never under inflate or over inflate

the tires.

Under inflation can cause unusual

handling characteristics or can

cause the rim to slip on the tire

bead, resulting in an accident or

damage to the tire or rim.

• Overinflation can cause the tire to

burst, resulting in personal injury.

Overinflation can also cause

unusual handling characteristics

which may result in an accident.

(1)

(2)

EXAMPLE

CAUTION

Hitting curbs and running over rocks

can damage tires and affect wheel

alignment. Be sure to have tires and

wheel alignment checked periodi-

cally by your authorised Maruti

Suzuki workshop.

WARNING

• This is important to ensure proper

steering and handling of the vehi-

cle. Never mix tires of different size

or type on the four wheels of your

vehicle. The size and type of tires

used should be only those

approved by MARUTI SUZUKI as

standard or optional equipment for

your vehicle.

• Replacing the wheels and tires

equipped on your vehicle with cer-

tain combinations of aftermarket

wheels and tires can significantly

change the steering and handling

characteristics of your vehicle.

• Therefore, use only those wheel

and tire combinations approved by

MARUTI SUZUKI as standard or

optional equipment for your vehi-

cle.

NOTICE

Replacing the original tires with tires

of a different size may result in false

speedometer or odometer readings.

Summary of Contents for CELERIO





























































































































































































































































































































Search results

Summary of Contents for CELERIO

Reviews:

Related manuals for CELERIO

Brands by name

Popular brands

MARUTI SUZUKI CELERIO, Manual

Search results

Summary of Contents for CELERIO

Reviews:

Related manuals for CELERIO

Brands by name

Popular brands