MARUTI SUZUKI CELERIO Manual Download Page 18

Page: 18 / 316

1-1

FUEL RECOMMENDATION

76MH1-74E

Fuel Recommendation

You must use unleaded petrol with an

octane number (RON) of 91 or higher.

Petrol/Ethanol blends

Blends of unleaded petrol and ethanol

(grain alcohol), also known as gasohol, are

commercially available in some areas.

Blends of this type may be used in your

vehicle if they are no more than 10% etha-

nol. Make sure this petrol-ethanol blend

has octane ratings no lower than those

recommended for petrol.

Petrol/Methanol blends

Blends of unleaded petrol and methanol

(wood alcohol) are also commercially

available in some areas. DO NOT USE

fuels containing more than 5% methanol

under any circumstances. Fuel system

damage or vehicle performance problems

resulting from the use of such fuels are not

the responsibility of MARUTI SUZUKI and

may not be covered under the New Vehicle

Warranty.

Fuels containing 5% or less methanol may

be suitable for use in your vehicle if they

contain cosolvents and corrosion inhibi-

tors.

NOTE:

If you are not satisfied with the driveability

or fuel economy of your vehicle when you

are using a petrol/alcohol blend, you

should switch back to unleaded petrol con-

taining no alcohol.

NOTICE

The fuel tank has an air space to

allow for fuel expansion in hot

weather. If you continue to add fuel

after the filler nozzle has automati-

cally shut off or an initial blowback

occurs, the air chamber will become

full. Exposure to heat when fully

fuelled in this manner will result in

leakage due to fuel expansion. To

prevent such fuel leakage, stop filling

after the filler nozzle has automati-

cally shut off, or when using an alter-

native non-automatic system, initial

vent blowback occurs.

NOTICE

Be careful not to spill fuel containing

alcohol while refueling. If fuel is

spilled on the vehicle body, wipe it up

immediately. Fuels containing alco-

hol can cause paint damage, which is

not covered under the New Vehicle

Limited Warranty.

Summary of Contents for CELERIO





























































































































































































































































































































Search results

Summary of Contents for CELERIO

Reviews:

Related manuals for CELERIO

Brands by name

Popular brands

MARUTI SUZUKI CELERIO, Manual

Search results

Summary of Contents for CELERIO

Reviews:

Related manuals for CELERIO

Brands by name

Popular brands