manualshive.com logo in svg

MARUTI SUZUKI CELERIO, Manual, Page: 67 / 316

Share
Download
MARUTI SUZUKI CELERIO Manual Download Page 67

2-48

BEFORE DRIVING

76MH1-74E

NOTE:

The activation point of this light varies

depending on road conditions (for exam-

ple, slope or curve) and driving conditions

because of fuel moving in the tank.

Turn Signal Indicators

50G055

When you turn on the left or right turn sig-

nals, the corresponding green arrow on the

instrument panel will flash along with the

respective turn signal lights. When you

turn on the hazard warning switch, both

arrows will flash along with all of the turn

signal lights.

Main Beam (high beam) Indicator 

Light

50G056

This indicator comes on when headlight

main beams (high beams) are turned on.

Security System Indicator 

(if equipped)

82K269

For details about the security system, refer

to “Security System” in this section.

NOTE:

If the security system indicator blinks when

the ignition switch is in the “ON” position,

there may be something wrong with the

security system. Ask your authorised

Maruti Suzuki workshop to inspect the sys-

tem.

Depress Brake Pedal Indicator 

(if equipped)

76MH0A047

Refer to “Auto Gear Shift” in the “OPERAT-

ING YOUR VEHICLE” section for details.

Lighting Control Lever

65D611S

Lighting Operation

60MK011

To turn the lights on or off, twist the knob

on the end of the lever. There are three

positions:

WARNING

To avoid possible injury, do not oper-

ate controls by reaching through the

steering wheel.

EXAMPLE

(3)

(2)

(1)

EXAMPLE

Summary of Contents for CELERIO





























































































































































































































































































































Reviews:

No comments