MARUTI SUZUKI CELERIO Manual Download Page 14 | Manualshive

Page: 14 / 316

background image

0-6

10.All maintenance actions (as specified in the Owner’s Manual

and Service Booklet) need to be followed and recorded in the
manual for emission warranty.

11. The customer needs to produce the PUC (Pollution Under

Control) certificate valid for the period preceding the test during
which the failure is discovered. The receipts (for the mainte-
nance of the vehicle as per specification in Owner’s Manual
and Service Booklet from the date of original purchase of the
vehicle) will also be required.

Conditions under which the Emission Warranty is not
APPLICABLE

1. In the absence of valid PUC certificate.

2. Vehicle not serviced from Maruti Suzuki authorised workshop

as per the schedule specified in this Owner’s Manual and Ser-
vice Booklet.

3. Vehicle subjected to abnormal use (accident, motor race, ral-

lies or for the purpose of establishing the records etc).

4. Use of non MGP (Maruti Genuine Part).

5. Vehicle that has been tampered with.

6. Tampering with odometer so that the actual kilometer reading

can not be determined.

7. Use of adulterated fuel and/or unspecified oils (Engine oil,

Transmission oil and Brake oil etc).

Annexure - A

List of parts covered under Emission Warranty

1. Fuel Injection Assembly, Pressure Regulator, Throttle Body

Assembly

2. Electronic Control Module (ECM).
3. Intake Manifold.
4. EGR valve.
5. Ignition Coil.
6. Canister Assembly.
7. Vapour Liquid Seperator.
8. Fuel Tank and Filler Cap.
9. PCV (Positive Crankcase Ventilation) Valve.

10. Oil Filler Cap.

11. Catalytic Convertor.

12. Exhaust Manifold.
13. All Fuel Injection System related sensors.
14. High Pressure Fuel Pump.
15. Glow Plug.
16. Glow Plug Controller.

«
...
12
13
14
15
16
...
»

Summary of Contents for CELERIO





























































































































































































































































































































Reviews:

No comments

Related manuals for CELERIO

2011 grand cherokee

Brand: Jeep Pages: 22

2013 Grand Cherokee

Brand: Jeep Pages: 704

Brand: Jeep Pages: 558

Brand: Kargo Master Pages: 13

Brand: Kargo Master Pages: 21

Brand: Kargo Master Pages: 4

HOIST-A-TOP JL CRANK

Brand: Lange Originals Pages: 13

ESCALADE FAMILY - SPECIFICATIONS 2011

Brand: Cadillac Pages: 1

Brand: Dacia Pages: 238

Brand: RAM Pages: 496

Truck Training Model

Brand: WABCO Pages: 56

Brand: Omix-Ada Pages: 6

Brand: Subaru Pages: 298

Brand: THIEYE Pages: 88

Brand: Maserati Pages: 302

Brand: Curt Manufacturing Pages: 4

Brand: Whispbar Pages: 112

Brand: Edelbrock Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands