Marta MT-4301, User Manual

Page: 15 / 41

15
Cooking time adjustment indication
Cooking temperature adjustment indication
Cooking time indication and delay time indication
COOKING WITH THE MULTICOOKER

Make sure that the multicooker is clean inside and outside. Check if there are foreign objects inside or between the pot and heating plate.

Place the inner pot into the multicooker.

Rotate the pot a bit. Make sure that the pot has intimate contact with the heating plate.

Put ingredients into the pot.

Close the lid.

Connect power cord socket into the multicooker socket.

Plug the multicooker in
. DШЧ‟Э ЩХЮР ТЧ ТП вШЮ СКЯОЧ‟Э ПЮХПТХХОН КХХ ЭСО rОqЮТrОmОЧЭЬ.
PROGRAM SELECTION

Press button to switch the multicooker on.

Press button
“MНЦЭ”
to choose cooking program until you see indication near required cooking program.

You see preset for certain program cooking time and temperature values on the display.

IП вШЮ НШЧ‟Э аКЧЭ
to change temperature and time settings press and cooking process starts. In most programs time countdown starts with cooking program start. Except programs
“SЬНЙХ/ ”,
“Frб/ ”, “ЇЙЫЬЙ/ ”
where countdown starts when system reaches operational temperature.

When cooking program is over you hear beep signal and
“AЭЬЧ KН
e
Ш WЙrХ”
function starts.
“AЭЬЧ УННШ ЯЙrХ”
function is unavailable in
“БЧПРЭrЬ/ ”, “Frб/ ”
programs. So keep warm
НШОЬЧ‟Э ПШХХШа ЭСШЬО ЩrШРrКmЬ.

To switch the multicooker off press and keep it pressed for 5 seconds.
FUNCTIONS
AUTO KEEP WARM
All programs except
“БЧПРЭrЬ
/
”
and
“Frб
/
”
have
“AЭЬЧ
keep w
ЙrХ”
function which means that keep warm function follows cooking program. If
“
Auto keep warm
”
follows cooking program you
see indication above keep warm. If there is no indication then there is no keep warm after program finish. You could switch
“
Auto keep warm
”
function off at any moment of cooking process
–
when you choose
cooking program, when program is running and when the program is over. To cancel
“
Auto keep warm
”
please keep button pressed for 5 seconds.
Note: In spite of the fact that
“AЭЬЧ У
eep warm
”
function is available for 2
4 РЧЭrЫ, МЧЦ‟Ь ФНЙЮН ЛЧЧУНМ ХНЙФ
for a long time. That may cause meal spoilage.
Note: If temperature in any cooking program exceeds normal or stipulate then the appliance automatically goes to keep warm state and keep warm indicator is on.