ON
Turn On the Ignition
3 long chirps & 3 flashes of the parking lights will
confirm exit of the programming mode.
Note: Waiting 15 seconds after the last command will
also cause the system to automatically exit the pro-
gramming mode.
One Chirp
Two Chirps
Three Chirps
Four Chirps
Button
LED One Pulse
LED Two Pulse
LED Three Pulse
LED Four Pulse
(Factory Default Setting)
Step 4
Step 3
Remote Feature Programming
Use the transmitter buttons as illustrated to adjust the features required. Keep re-pressing the transmitter button
that relates to the feature you want to adjust until the correct amount of chirp/beeps is heard. Move on to the
next feature.
All Chirps On
Siren Chirp On Only
Horn Chirp On Only
All Chirps Off
Passive Arming without
Passive Door Locking
Passive Arming with
Passive Door Locking
Active Arming
Automatic Rearm On
Automatic Rearm Off
Instant Door Ajar Warning
Door Ajar Error Chirp with
45 Second Check Delay
3 Hour Start Timer
2 Hour Start Timer
Inactive Car-Jack Mode
Active Car-Jack Mode
Panic with Ignition Off
Panic with Ignition On & Off
Panic with Ignition On & Off
Panic with No Time Limit
Without Panic Function
+
+
+
Passive Car-Jack Mode
Alarm Feature Programming (Part 2)
Turn the ignition switch from the OFF position to the
ON position 3 times leaving it in the OFF position the
third time.
Before 15 seconds has passed, push and release the
valet switch three (3) times then push the valet switch
a fourth time and hold it down until two (2) short
chirps/beeps + one (1) long chirp beep is heard then
release it. You are now in part 2 programming mode.
Step 1
Step 2
OFF
ON
3X
3X + 1X (Hold)
To get into Alarm Feature Programming mode (Part 2), repeat the following procedure:
17
M8A-IM.qxp 4/26/05 15:56 Page 17
