21
Step 3
Remote Start Feature Programming
Use the transmitter buttons as illustrated to adjust the features required. Keep re-pressing the transmitter button that
relates to the feature you want to adjust until the correct amount of chirp/beeps is heard. Move on to the next feature.
ON
Turn On the Ignition
3 long chirps & 3 flashes of the parking lights will
confirm exit of the programming mode.
Note: Waiting 15 seconds after the last command will
also cause the system to automatically exit the pro-
gramming mode.
Step 4
Button
One Chirp
One LED Pulse
(Factory Default
Setting)
Two Chirps
LED Two Pulse
Three Chirps
LED Three Pulse
Four Chirps
LED Four Pulse
Diesel Engine without
Wait-To-Start Light
10 Second
Warm-up Timer
Diesel Engine without
Wait-To-Start Light
15 Second
Warm-up Timer
Diesel Engine without
Wait-To-Start Light
20 Second
Warm-up Timer
10 min. Run Time
20 min. Run Time
30 min. Run Time
5 min. Run Time
Factory Alarm Disarm
with Channel 3 On
Without this Feature
Constant Parking
Light Output
Parking Light
Flashing Output
Door Lock
Before Start
Door Lock
After Shutdown
Door Lock Before Start
and Door Lock
After Shut Down
Without this Feature
P
ress - Button
to Activate
Remote S
tart*
Press Buttons
to Activate
Remote Start
Press Button
to Activate
Remote Start
Fahrenheit Display
for Temperature
Celsius Display
for Temperature
Temperature Control
Starting “Off”
Temperature Control
Starting 5° F (-15° C)
Temperature Control
Starting -4° F (-20° C)
Temperature Control
Starting -22° F (-30° C)
+
+
+
+
Gasoline Engine
Diesel Engine with
Wait-to-Start Light
(White/Green Wire
Must Be Connected)
+
*Safe Start (Child Safety Mode)
Factory defaults setting is to press button twice to start the vehicle. To lessen the chance of an accidental remote
start, program the transmitter to start the vehicle using buttons.
+
M8A-IM.qxp 4/26/05 15:56 Page 21
