One Chirp
Two Chirps
Three Chirps
Four Chirps
Button
LED One Pulse
LED Two Pulse
LED Three Pulse
LED Four Pulse
(Factory Default Setting)
Alarm Feature Programming (Part 3)
Turn the ignition switch from the OFF position to the
ON position 3 times leaving it in the OFF position the
third time.
Before 15 seconds has passed, push and release the
valet switch five (5) times then push the valet switch a
sixth time and hold it down until three (3) short
chirp/beeps + one (1) long chirp/beep is heard then
release it. You are now in part 3 programming mode.
Step 1
Step 2
OFF
ON
3X
5X + 1X (Hold)
Step 3
Remote Feature Programming
Use the transmitter buttons as illustrated to adjust the features required. Keep re-pressing the transmitter button that
relates to the feature you want to adjust until the correct amount of chirp/beeps is heard. Move on to the next feature.
ON
Turn On the Ignition
3 long chirps & 3 flashes of the
parking lights will confirm exit of
the programming mode.
Note: Waiting 15 seconds after the
last command will also cause the
system to automatically exit the
programming mode.
Step 4
Brown/White Wire:
(-) 200mA Horn Output
with Chirp Indicator On
Black/Green Wire:
Channel 4 Output
Momentary Output
Black/Green Wire: Ground Output During Remote Start (Crank)
Pink Wire: Two Step Door
Unlock Output
Pink Wire: Factory Security
Disarm Signal Output
Pink Wire: Start Status
Output
(Shock Sensor Bypass)
Brown/White Wire:
Factory Security Rearm
Signal Output
+
Black/Green Wire:
Channel 4 Output
Latched Output
Black/Green Wire:
Channel 4 Output
Latched Output and Reset
with Ignition "ON"
Black/Green Wire:
Channel 4 Output
Timer Programming
(See Timer Programming
Page 20)
Five Chirps
LED Five Pulses
Black/Red Wire:
Channel 5 Output
Momentary Output
+
Black/Red Wire:
Channel 5 Output
Latched Output
Black/Red Wire:
Channel 5 Output
Latched Output and Reset
with Ignition "ON"
Black/Red Wire:
Channel 5 Output
Timer Programming
(See Timer Programming
Page 20)
Black/Violet Wire:
Channel 6 Output
Momentary Output
+
Black/Violet Wire:
Channel 6 Output
Latched Output
Black/Violet Wire:
Channel 6 Output
Latched Output and Reset
with Ignition "ON"
Black/Violet Wire:
Channel 6 Output
Timer Programming
(See Timer Programming
Page 20)
White/Blue Wire:
1 pulse Activate
White/Blue Wire:
2 pulse Activate
White/Blue Wire:
3 pulse Activate
Brown/White Wire:
(-) 200mA Horn Output for
Trigger Only
No Function
19
M8A-IM.qxp 4/26/05 15:56 Page 19
