Wiring
White Mini 10-Pin
(continued)
Brown/White Wire:
(-) 200mA Programmable Output
Horn Output (See Alarm Feature Programming Part 3):
This wire can be used to activate the existing vehicle’s horn as the alarm system’s optional warning audible
device. It’s a transistorized low current output, and should only be connected to the low current ground out-
put from the vehicle’s horn switch. When the system is triggered, the horn will sound (depending on the vehi-
cle’s requirement an additional relay may be required as shown).
Factory Security Rearm
Signal Output (See Alarm
Feature Programming Part 3):
This wire can be used to rearm
a factory installed security sys-
tem. This wire will supply a
pulse whenever the remote
start times out or is shut down
using the transmitter and
remote door locking.
Black/Violet Wire:
(-) 200mA Timer Control Channel 6 Output
(See Alarm Feature Programming Part 3) (Factory default setting on momentary ground) This wire is built-
in user programmable timer output provides a ground through this wire. You may program the built-in timer
to send ground signal for any time interval between 1 second and 2 minutes. For instance, this timer output
may be used to turn on the headlights with the remote control. Also, on certain Mercedes Benz, BMW, Jaguar
and Volkswagens you can use this unique timed output to allow remote closure of all power windows and
sunroof without the need for an external module.
Black/Red Wire:
(-) 200mA Timer Control Channel 5 Output
(See Alarm Feature Programming Part 3) (Factory default setting on momentary ground) This wire is built-
in user programmable timer output provides a ground through this wire. You may program the built-in timer
to send ground signal for any time interval between 1 second and 2 minutes. For instance, this timer output
may be used to turn on the headlights with the remote control. Also, on certain Mercedes Benz, BMW, Jaguar
and Volkswagens you can use this unique timed output to allow remote closure of all power windows and
sunroof without the need for an external module.
Black/Green Wire:
(-) 200mA Timer Control Channel 4 Output/Key Sensor Output
(See Alarm Feature Programming Part 3) (Factory default setting on momentary ground) This wire is built-
in user programmable timer output provides a ground through this wire. You may program the built-in timer
to send ground signal for any time interval between 1 second and 2 minutes. For instance, this timer output
may be used to turn on the headlights with the remote control. Also, on certain Mercedes Benz, BMW, Jaguar
and Volkswagens you can use this unique timed output to allow remote closure of all power windows and
sunroof without the need for an external module.
When Used as a Key Sensor Bypass Output:
This output is for a key sense wire bypass that some Chrysler and Toyota vehicles need to activate remote
start. This wire activates when the Remote Start is activated and stays on for 20 seconds.
87
87a
86
85
30
Brown/White Wire
+12V
To Horn
+12V or Ground
Depending on
System Requirements
Fuse
White 10-Pin
Mini Connector
12
M8A-IM.qxp 4/26/05 15:56 Page 12
