all of the objects on each window. Using the 520CDEMO.EPJ project, the following should
be seen :
2.
Notice that the tree displays the title for each window next to the window number. This
makes it easy to determine windows have been created for a project. The asterisk next to
Window #10 indicates that this window is currently open.
3.
To display an open window, click on the
window number
in the Window Treebar. To
display a window that is not yet open, double-click on the
window number
. This will
automatically open the window and display it.
4.
To change any settings or close an open window, click on the
window number
to select it.
Then right-click anywhere inside the Window Treebar to display a pop-up dialog box. Select
Close
to close the window or
Setting
to change any of the window settings.
5.
Finally, to create a new window click on any window number that is not currently used.
Then right-click inside the Window Treebar and click
Create
.
1010-1001a, Rev 02
Using EZware-500
43
Summary of Contents for Silver HMI504T
