2.
From the
Edit
menu, click
System Parameters
. The Set System Parameters dialog box is
displayed.
3.
Click the
General
tab to display the General form.
4.
Enter the number of the base window just created in
Message board window (0, 10-1999):
which is located at the bottom of the General form. Note: 0 is used to disable the message
board feature.
5.
Click
OK
.
6.
Use the Function Key Object, Direct Window Object, or Indirect Window Object to call up
the message board.
Op tional Pa ram e ters
In addition to using the message board, the OIT operator can change the following parameters.
Set the Op er a tion Mode for the Mes sage Board
Using the Function Key Object, you can program a touch screen object to change ‘operating mode’ of the pen.
There are three operating modes:
·
Pen: select this mode when you want to write a message.
·
Brush: select this mode when you want to erase parts of a message.
·
Clip: select this mode to ‘clip’ or cut out a rectangular section of a message.
The touch screen object can be placed onto the message board or any other window.
4
To create a Change Message Board Operation Mode key
1.
From the
Parts
menu, select
Function Key
. The Create Function Key Object dialog box
appears.
2.
Click the
General
tab to display the General form.
3.
Click the
Message Board
option.
4.
Select
Set operation mode
from the pull-down.
5.
Click the
Attributes
button to select the operation mode you want to use.
6.
Click
OK
to exit the
Create Function Key Object
dialog box.
7.
Place the new touch screen object on the window screen.
When this key is pressed, it will change the operation mode used when a message is written on the board.
Set the Pen Style for the Mes sage Board
Using the Function Key Object, you can program a touch screen object to change the thickness of the line used for
the pen. The touch screen object can be placed onto the message board or any other window.
4
To create a Change Message Board Pen Style key
1.
From the
Parts
menu, select
Function Key
. The Create Function Key Object dialog box
appears.
2.
Click the
General
tab to display the General form.
3.
Click the
Message Board
option.
4.
Click the
Set operation mode
pull-down box and select
Set pen style
.
5.
Click the
Attributes
button to select the line width you want to use.
6.
Click
OK
to exit the
Create Function Key Object
dialog box.
7.
Place the new touch screen object on the window screen.
When this key is pressed, it will change the line thickness used when a message is written on the board.
Set the Pen Color for the Mes sage Board
Using the Function Key Object, you can program a touch screen object to change the color used for the pen. The
touch screen object can be placed onto the message board or any other window.
1010-1001a, Rev 02
Cre ating Win dows
121
Summary of Contents for Silver HMI504T
