Manning YB8, Operating And Instruction Manual

Page: 58 / 121

RESTART=0 RESUME=1
0
04:30:02
The sampler then prompts for selection of RESTARTING sampling
at the beginning of each active period (enter “0") or RESUMING
sampling at the beginning of each active period (enter “1").
Restarting sampling causes t
he
sampler reset the bottle and sample
count at the beginning of the next active period.
ENTER DAYS OF WEEK
Mo Tu We Th Fr Sa Su
The display prompts to enter the days of the week that you want to
sample. This information is displayed for only 5 seconds.
The display then changes to numbers on the bottom line which
1 2 3 4 5 6 7
represent the days of the week (1=Monday, 2=Tuesday, etc.) Press
number key(s) on the keypad that corresponds to the day(s) that you
want to sample.
Mo Tu Fr
1 2 3 4 5 6 7
For each day that was selected as a active sampling day, the name
of the day will appear above its corresponding number on the first
line of the display. If you press the number key of a day that is
active, it will become inactive an the name of the day will
disappear from the first line of the display. After all the active days
have been selected, press <ENTER> to continue.
Mon. START TIME
__:__
04:30:50
For each day that was selected as an active sampling day, the
sampler asks for a start time in HH:MM format. Enter the start
time and press <ENTER>. Enter a start time of 00:00 if you want
sampling to start at the beginning of the day.
The sampler then asks for the sop time in HH:MM format. Enter
Mon. STOP TIME
__:__ 07/30FRI
the stop and press <ENTER>. Enter a stop time of 24:00 if you
want sampling to continue to the end of the day.
This step and the previous one are repeated for each day that was
selected to be an active sampling day.
After the final stop time has been entered, the display will change
SAMPLER READY A
04:30:02
to SAMPLER READY. If the present day and time is in an active
sampling period, the display will have a blinking “A” in the upper
right-hand corner. If the present day and time is not in an active
sampling period, the display will have a blinking “I” in the upper
right-hand corner.
Once the active period has been setup using Program 15, you can then enter a sampling program.
MODEL YB8 PROGRAMMING SECTION
January 2000/Manning Environmental Inc. Page 24-B