manualshive.com logo in svg

Manitou MLT 961-145 V PLUS L JD ST4 S1, Operator'S Manual

The Manitou MLT 961-145 V PLUS L JD ST4 S1 is a powerful and efficient machine designed for heavy-duty lifting and material handling. Its Operator's Manual is essential for safe and proper usage. Download the manual for free at manualshive.com, ensuring you have all the necessary instructions at your fingertips.

Share
Download
background image

2 - 58

5 - AUTOMATIC TOWING HOOK ON COUPLING LADDER (OPTIONAL)

t

 IMPORTANT 

t

Pay attention to the risk of pinching or crushing during this operation. 

When released, ensure that the trailer stands on its own.

 -Position the lift truck as near as possible to the trailer ring.

ADUSTING THE TOWING HOOK

 -Lift handle 1 and turn it upward to release pins 2 on each side of the ladder.

 -Support the towing hook and position it according to the height of the trailer ring.

 -Turn handle 1 downward to insert pins 2 into the ladder and release the handle.

COUPLING THE TRAILER

 -Lift the automatic towing pin using lever 3.

 -Move the telehandler so that the ring of the trailer is in the automatic hook.

NOTE:  the hook closes automatically when the ring of the trailer touches the bottom part of the hook. The hook can be 

lowered by hand using lever 3.

UNCOUPLING THE TRAILER

 -Lift the hook using lever 3 to uncouple the trailer.

6 - AUTOMATIC TOWING JOINT ON COUPLING LADDER (OPTIONAL)

t

 IMPORTANT 

t

Pay attention to the risk of pinching or crushing during this operation. 

When released, ensure that the trailer stands on its own.

 -Position the lift truck as near as possible to the trailer ring.

ADUSTING THE TOWING HOOK

 -Lift handle 1 and turn it upward to release pins 2 on each side of the ladder.

 -Support the towing hook and position it according to the height of the trailer ring.

 -Turn handle 1 downward to insert pins 2 into the ladder and release the handle.

COUPLING AND UNCOUPLING THE TRAILER

 -Remove pin 2, remove pin 3.

 -Lift stop 4.

 -Position or remove the towing hook on the towing ball.

 -Refit block 4, pin 3 and pin 2.

1

3

4

2

2

5

EXAMPLE

1

2

3

EXAMPLE

649100 EN-US-AU (20/05/2019)

MLT 961-145 V PLUS L JD ST4 S1

Summary of Contents for MLT 961-145 V PLUS L JD ST4 S1





















































































































































































Reviews:

No comments

Related manuals for MLT 961-145 V PLUS L JD ST4 S1

Brands by name

Popular brands

Load more brands