manualshive.com logo in svg

Manitou MLT 961-145 V PLUS L JD ST4 S1, Operator'S Manual

The Manitou MLT 961-145 V PLUS L JD ST4 S1 is a powerful and efficient machine designed for heavy-duty lifting and material handling. Its Operator's Manual is essential for safe and proper usage. Download the manual for free at manualshive.com, ensuring you have all the necessary instructions at your fingertips.

Share
Download
background image

3 - 7

܍

 1000 HOUR - PERIODIC MAINTENANCE - EVERY 1000 HOURS OF SERVICE OR 2 YEARS

IN ADDITION, CARRY OUT PERIODIC MAINTENANCE FOR 500 HOURS OF SERVICE.

 -CHECK  

Seat belt  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-28

 -REGENERATE  

"Parked telehandler" exhaust particulate filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-28

 -CLEAN  

Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-29

 -REPLACE  

Coolant  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-30

 -REPLACE  

Dry air filter cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-31

 -REPLACE  

Ventilation circuit in the I.C. engine guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-31

 -REPLACE  

Front wheel reducer oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-31

 -REPLACE  

Rear wheel reducer oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-31

 -REPLACE  

Gearbox oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-32

 -CLEAN  

Speed sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-32

 -CHECK  

I.C. engine silent blocks *. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-33

 -CHECK  

Gearbox silent blocks *. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-33

 -CHECK  

Gearbox controls *. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-33

 -CHECK  

Brake circuit pressure *. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-33

 -CHECK  

Wear of boom pads *  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-33

 -CHECK  

Condition of wiring harness and cables * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-33

 -CHECK  

Lighting and signalling * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-33

 -CHECK  

Indicators * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-33

 -CHECK  

Side rear-view mirror conditions * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-33

 -CHECK  

Cab structure *  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-33

 -CHECK  

Structure of the chassis *. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-33

 -CHECK  

Attachment holder table * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-33

 -CHECK  

Attachment conditions * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-33

 -REPLACE  

Brake oil * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-33

 -PURGE  

Brake circuit *. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-33

 -ADJUST  

Brake * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-33

* Consult your dealer

܎

 2000 HOUR - PERIODIC MAINTENANCE - EVERY 2000 HOURS OF SERVICE OR 4 YEARS

IN ADDITION, CARRY OUT PERIODIC MAINTENANCE FOR 500 HOURS OF SERVICE AND 1000 HOURS OF SERVICE.

 -CHECK  

Tightening torque of the wheel nuts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-34

 -REPLACE  

Hydraulic oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-34

 -CLEAN  

Suction strainer for hydraulic oil tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-34

 -REPLACE  

Hydraulic oil tank breather . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-34

 -CHECK  

Radiator *  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-36

 -CHECK  

Transmission pressures * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-36

 -CHECK  

Steering *  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-36

 -CHECK  

Steering swivel joints *. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-36

 -CHECK  

Wear of the brake pads and the brake disk * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-36

 -CHECK  

Boom assembly conditions * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-36

 -CHECK  

Bearings and articulation rings *  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-36

 -CHECK  

Rubber hose pipe and piping conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-36

 -CHECK  

Cylinder conditions (leakage, rods) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-36

 -CHECK  

Hydraulic circuit pressures *. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-36

 -CHECK  

Bearings and articulation rings *  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-36

 -CLEAN/CHECK  

Air conditioning (OPTIONAL). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-36

 -REPLACE  

Compressor belt (OPTIONAL air conditioning) *. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-36

* Consult your dealer

Ü

 

 3000 HOUR - PERIODIC MAINTENANCE - EVERY 3000 HOURS OF SERVICE OR 6 YEARS

IN ADDITION, CARRY OUT PERIODIC MAINTENANCE FOR 500 HOURS OF SERVICE AND 1000 HOURS OF SERVICE.

 -REPLACE 

Dry air filter safety cartridge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-38

Ü

 

 4000 HOUR - PERIODIC MAINTENANCE - EVERY 4000 HOURS OF SERVICE OR 8 YEARS

IN ADDITION, CARRY OUT PERIODIC MAINTENANCE FOR 500 HOURS OF SERVICE AND 1000 HOURS OF SERVICE.

 -REPLACE  

DEF (Diesel Exhaust Fluid) feed pump filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-39

Summary of Contents for MLT 961-145 V PLUS L JD ST4 S1





















































































































































































Reviews:

No comments

Related manuals for MLT 961-145 V PLUS L JD ST4 S1

Brands by name

Popular brands

Load more brands