Manitou MLT 961-145 V PLUS L JD ST4 S1, Operator'S Manual

Page: 125 / 180

3 - 17
CHECK Waterproofing of front wheel reducing gears
CHECK Waterproofing of rear wheel reducing gears
Place the lift truck on level ground with the I.C. engine stopped.
-Carry out a visual check of level plugs for any seepage or leaks.
-In the event of leaks or seepage, monitor the level:
• Place the level plug 1 horizontally.
• Remove the level plug: oil must reach the hole.
• If necessary, add oil (
e
LUBRICANTS AND FUEL) using the same opening.
• Fit the level plug back on and tighten it (tightening torque: 34 to 49 Nm).
CHECK Brake oil level
Place the lift truck on level ground.
t
IMPORTANT
t
If the brake oil level is abnormal consult your dealer.
-Open the protective casing 1 with the ignition key.
-Check tank 2. The level is correct when it is situated at the MAX level on the tank.
-Visually check the tank and pipes for leaks.
-If necessary, add oil (
e
LUBRICANTS AND FUEL).
-Remove the plug 3.
-Add oil through filler port.
-Refit the cap.
CHECK Waterproofing on front axle differential
CHECK Waterproofing on rear axle differential
Place the lift truck on level ground with the I.C. engine stopped.
-Carry out a visual check of filling, level and drain plugs for any seepage or leaks.
-In the event of leaks or seepage, monitor the level:
• Remove the level plug 1: oil must reach the hole.
• If necessary, add oil (
e
LUBRICANTS AND FUEL) through the filler port 2.
• Fit the level plug 1 back on and tighten it (tightening torque: 34 to 49 Nm).
1
2
1
1
2
3
4