manualshive.com logo in svg

Manitou MLT 961-145 V PLUS L JD ST4 S1, Operator'S Manual, Page: 100 / 180

Share
Download
Manitou MLT 961-145 V PLUS L JD ST4 S1 Operator'S Manual Download Page 100

2 - 64

4 - EXTERNAL LOSS RETURN

This allows connecting an attachment for which the loss return is required.

• A -  Fixed position, drain-back not connected.

• B -  Movable position, drain-back connected.

5 - EASY ATTACHMENT HYDRAULIC CONNECTION (ECS)

This allows easily connecting and disconnecting the attachment hydraulically.

OPERATION

 -Switch on telehandler ignition.

 -Press on the button for two seconds to release the attachment circuit hydraulic 

pressure. screens 

i

 

i

 will be alternately displayed.

 -Connect or disconnect the rapid connectors of the hydraulic attachment (

e

: 4 - 

OPTIONAL ATTACHMENTS FOR USE WITH THE RANGE: PICKING UP THE ATTACHMENTS).

B

A

649100 EN-US-AU (20/05/2019)

MLT 961-145 V PLUS L JD ST4 S1

Summary of Contents for MLT 961-145 V PLUS L JD ST4 S1





















































































































































































Reviews:

No comments