Manitou MLT 961-145 V PLUS L JD ST4 S1 Page 82 Operator'S Manual Download

Page: 82 / 180

2 - 46

19 - HYDRAULIC CONTROL JOYSTICK

According to equipment

Authorization for using the hydraulic controls is given by the validation of the driver’s

presence (

: 2 – DESCRIPTION: 6 - HUMAN-MACHINE INTERFACE (HMI)) and if the

conditions for using the hydraulic control are followed (

According to equipment)

IMPORTANT

Do not attempt to alter the hydraulic system pressure. In the event of suspected malfunction, contact your dealer.

ANY ALTERATION MAY RENDER THE WARRANTY NULL AND VOID.

Use the hydraulic controls carefully without jerking, to avoid accidents caused by shaking the telehandler.

- A - Control lever for lifting and tilting.

- B - Control button for telescopic movements.

- C - Attachment control button.

- D - Boom head solenoid valve (OPTIONAL) (

According to equipment)

- E - Tilt corrector control button (

According to equipment)

- OK - Hydraulic movements enable button

(According to equipment)

Place your hand on the joystick, press the hydraulic movements enable button and

execute the movement. A timer allows hydraulic movements to keep active when using

the telescopic handler. If necessary, reactivate the hydraulic movements by pressing

the hydraulic movements enable button.

LIFTING THE LOAD

- Move lever A backward to lift.

- Move lever A forward to lower.

TILTING THE LOAD

- Move lever A to the left to tilt the load upward.

- Move lever A to the right to tilt the load downward.

TELESCOPIC MOVEMENTS

- Move button B forward to extend the load.

- Move button B backward to withdraw the load.

ATTACHMENT

- Move button C forward or backward.

- With button C forward, button C1 limits the hydraulic flow of the attachment line

from 0% to 100%.

- With button C backward, button C2 limits the hydraulic flow of the attachment

line from 0% to 100%.

BOOM HEAD SOLENOID VALVE (OPTIONAL)

Button D (

DESCRIPTION AND USE OF OPTIONS).

TILT CORRECTOR

(According to equipment)

- Keep button D pressed and move lever A to the left to tilt the lift truck to the left.

- Keep button D pressed and move lever A to the right to tilt the lift truck to the right.

The levelling operation is allowed if the angle of the telescopic boom is lower than

21° (

:7D - DISPLAY).

E D

(According to equipment)

649100 EN-US-AU (20/05/2019)

MLT 961-145 V PLUS L JD ST4 S1

Summary of Contents for MLT 961-145 V PLUS L JD ST4 S1





















































































































































































Search results

Summary of Contents for MLT 961-145 V PLUS L JD ST4 S1

Reviews:

Related manuals for MLT 961-145 V PLUS L JD ST4 S1

Brands by name

Popular brands

Manitou MLT 961-145 V PLUS L JD ST4 S1, Operator'S Manual

Search results

Summary of Contents for MLT 961-145 V PLUS L JD ST4 S1

Reviews:

Related manuals for MLT 961-145 V PLUS L JD ST4 S1

Brands by name

Popular brands