1 - 11
E - LIFTING PEOPLE
-The use of working equipment and load lifting attachments to lift people is:
• either forbidden
• or authorised exceptionally and under certain conditions (
e
Current
regulations in the country in which the telehadler is used)
�
-The pictogram posted at the operator station reminds you that:
Left-hand column
• It is forbidden to lift people, with any kind of attachment, using a non
PLATFORM-fitted telehadler
�
Right-hand column
• With a PLATFORM-fitted telehadler, people can only be lifted using platforms
designed by MANITOU for the purpose
�
-MANITOU sells equipment specifically designed for lifting people (OPTION
PLATFORM telehadler, contact your dealer)
�
OPERATING INSTRUCTIONS UNLADEN AND LADEN
A - BEFORE STARTING THE TELEHANDLER
-Carry out daily maintenance (
e
3 - MAINTENANCE: 10 HOUR - DAILY MAINTENANCE OR EVERY 10 HOURS OF SERVICE)
�
-Make sure that the driver's cab is clean, particularly the floor and floor mat
�
Check that no movable object may hinder
the operation of the telehadler
�
-Make sure the lights, indicators and windscreen wipers are working properly
�
-Make sure the rear view mirrors are in good condition, clean and properly adjusted
�
-Make sure the horn works
�
B - DRIVER'S OPERATING INSTRUCTIONS
-Whatever his experience, the operator is advised to familiarize himself with the position and operation of all the controls
and instruments before operating the telehadler
�
-Wear clothes suited for driving the telehadler, avoid loose clothes
�
-Make sure you have the appropriate protective equipment for the task to be performed
�
-Prolonged exposure to high noise levels may cause hearing problems
�
It is recommended to wear ear muffs to protect
against excessive noise
�
-Always face the telehadler when getting into and leaving the driving seat and use the handle(s) provided for this purpose
�
Do not jump out of the seat to get down
�
-Always pay attention when using the telehadler
�
Do not listen to the radio or music using headphones or earphones
�
-Never operate the telehadler when hands or feet are wet or soiled with greasy substances
�
-For increased comfort, adjust the seat to your requirements and adopt the correct position in the driver’s cab
�
t
IMPORTANT
t
Under no circumstances must the seat be adjusted while the telehadler is moving.
-The operator must always be in his normal position in the driver’s cab
�
It is prohibited to have arms or legs, or generally
any part of the body, protruding from the driver’s cab of the telehadler
�
-The safety belt must be worn and adjusted to the operator's size
�
-The control units must never in any event be used for any other than their intended purposes (e
�
g
�
climbing onto or down
from the telehadler, portmanteau, etc
�
)
�
-If the control components are fitted with a forced operation (lever lock) device, it is forbidden to leave the cab without
first putting these controls in neutral
�
-It is prohibited to carry passengers either on the telehadler or in the driver's cab
�
C - ENVIRONMENT
-Comply with site safety regulations
�
-If you have to use the telehadler in a dark area or at night, make sure it is equipped with working lights
�
-During handling operations, make sure that no one is in the way of the telehadler and its load
�
-Do not allow anybody to come near the working area of the telehadler or pass beneath an elevated load
�
-When using the telehadler on a transverse slope, before lifting the jib, follow the instructions given in the paragraph:
INSTRUCTIONS FOR HANDLING A LOAD: D - TRANSVERSE ATTITUDE OF THE TELEHANDLER
�
Summary of Contents for MLT 961-145 V PLUS L JD ST4 S1
