KJM MANDÍK
–
Detailed operating instructions
M&C KJMPNO 07/2022
MANDÍK, a.s.,
83
Login - PIN management
14.4
In this item you can log in and log out with a password. Another option is to change the
preset user or service password, provided you know the existing password.
Without a PIN entered, only basic data is displayed on the controller display, where only
the regime (
Off
/
Tempering
/
Economy
/
Comfort
) can be changed. All the other changes can only be
made by entering a user or service PIN. The factory default PINs are set as follows:
PIN:
User
= ‚0000‘
– access level number 3 appears in the top left corner of the
display or a single key in the top right corner of the HMI-TM or HMI-DM controls.
PIN:
Service
= ‚2222‘
– top left corner of the display will show access level number 2
or two keys in the top right corner of the HMI-TM or HMI-DM controls.
PIN:
Factory
= ‚xxxx‘
– top left corner of the display will show access level number 0
or three keys in the top right corner of the HMI-TM or HMI-DM controls.
15
Alarm message
The alarm message can be any predefined message such as fault, event, message, etc. It
consists of name, status, type (priority) and time of occurrence or extinction. Current alarm listings
and alarm history can contain the maximum of 50 items. The alarm messages are described in the
separate documentation
“Alarm messages”
.
