Mandik Climatix, Operating Instructions Manual

Page: 75 / 83

KJM MANDÍK
–
Detailed operating instructions
M&C KJMPNO 07/2022
MANDÍK, a.s.,
www.mandik.cz
75
Condensing unit 3 – switch on Cnd3O Cd3O
Heat pump circuit 1 – compressor – switch on HPC1 HP1C
Heat pump - 4way valve cool/heat HPV1 HPV
Class A or B alarm 28 AA
Heat pump 2nd circuit - compressor - switch on HPC2 HP2C
Heat pump - cool HPC HPC
Heat pump – heat HPH HPH
Humidifier – switch on Hum Hu
Fire dampers power supply - switch on DmpF FD
Fire signalling Fire Fr
Boiler room – switch on Boil Bo
Attenuation regime Red Red
Comfort regime Cmf Cmf
Filter clogging FiE FiA
Unit service Srv Srv
Temperature period Summer/Winter 40 S/W
Gas heating convector - switch on CnvG CvG
Unit fault Err A
Condensing unit 4 – cool Cnd4C Cd4C
Condensing unit 4 – heat Cnd4H Cd4H
Unit operation On On
Fan operation FnO FO
Fan failure FnE FA
Heating/Cooling status H/C H/C
Condensing unit 4 – switch on Cnd4O Cd4O
Condensing unit 5 – switch on Cd5O
Condensing unit 6 – switch on Cd6O
Condensing unit 5 – cool Cd5C
Condensing unit 6 – cool Cd6C
Condensing unit 5 – heat Cd5H
Condensing unit 6 – heat Cd6H
Class C o D alarm AC
Backup supply fan - switch on FS2
Backup exhaust fan - switch on FE2
Table 2 - List of digital output assignment abbreviations
Analog output assignments 13.4
The assignment of analog outputs is done in the Assignm.AnalogOutput , menu where the
line of the selected analog output is assigned to the required component to be controlled by this
output (e.g. for a plate recuperator damper controlled from output Y1 of the controller, you set
AO.Y1 = Rc) . A list of the individual component abbreviations used in the analog output