Mandik Climatix, Operating Instructions Manual

Page: 77 / 83

KJM MANDÍK
–
Detailed operating instructions
M&C KJMPNO 07/2022
MANDÍK, a.s.,
www.mandik.cz
77
Condensing unit 6 – off = 1V, on = 9V Cd6O
Condensing unit 5 – output Cd5U
Condensing unit 6 – output Cd6U
Condensing unit 5 – Heat/Cool (FDP3) Cd5CH
Condensing unit 6 – Heat/Cool (FDP3) Cd6CH
Backup supply fan - speed FS2
Backup exhaust fan - speed FE2
Air flow controller 3 - position AF3
Air flow controller 4 - position AF4
Air quality – output AQ
Table 4 - List of analog output assignment abbreviations
External switches 13.5
The external switches are configurable and fixed. Their assignment is the same as for other
digital inputs and is described in the chapter “Inputs and Outputs”.
13.5.1 Configurable external switches
These switches are used to switch the modes of the AC unit externally, and the specific
function of each is determined by the option in Configuration

ModeSwitches . Their function is
enabled in ComponentsMachine

Others .

1Switch – is used depending on the ModeSwitches configuration:

Modes – has the function of switching the AC unit to the Economy regime.

Modes2 – has the function of switching the AC unit to the regime Economy .

2xMisto – has the function of switching the AC unit to the regime Economy . When
the 2Switch contact is activated, it switches the AC unit from the Economy regime to
Comfort .

3xSpeed – has the function of switching the AC unit to the Comfort regime at speed
stage I.

2Switch – is used depending on the ModeSwitches configuration:

Modes – when the 1Switch contact is activated, it switches the AC unit from the
Economy regime to Comfort . When the 1Switch contact is open, it has no function.

Modes2 – switches the AC unit to the Comfort regime regardless of the status of
1Switch .