![background image](http://html1.mh-extra.com/html/mandik/climatix/climatix_operating-instructions-manual_4004498067.webp)
KJM MANDÍK
–
Detailed operating instructions
M&C KJMPNO 07/2022
MANDÍK, a.s.,
67
ModeSwitches
(
No
/
Modes
/
Modes2
/
2xPlace
/WRF–S/WRF–P/WRF–F/CPM–P/CPM–P/CPM–
F/
3xSpeed
)
– selection of the type of operation using external switches. The function options
of the external switches are as follows:
Modes
– in
AssignmentInputs/Outputs
ExternalSwitches
, there are two digital
regime control inputs displayed (
1Switch
,
2Switch
). The first one has the function of
Off
/
On
of the AC unit, the second one is used to switch the
Economy
/
Comfort
modes
when the first contact is switched.
3Switch
is designed for potential external
activation of the function.
Modes2
– in
AssignmentInputs/Outputs
ExternalSwitches
, there are two digital
inputs for regime control displayed (
1Switch
,
2Switch
). The first switches the AC unit
into the
Economy
regime, and the other one into the regime of
Comfort
.
3Switch
is
designed for potential external activation of the function.
2xPlace
– in
AssignmentInputs/Outputs
ExternalSwitches
, there two digital inputs
(
1Switch
,
2Switch
) are displayed to switch the unit from two different locations to
the
Economy
regime. When both contacts are closed, the unit is in the regime of
Comfort
.
3Switch
is designed for potential external activation of the function.
WRF–S, CPM–S
– fans are controlled for 0–100% via the WRF04 or CP–M–B
controller. In the
Configuration
menu, there it is necessary to set
TypeControl
=
Direct
for both fans and then in menu
AssignmentInputs/Outputs
Fans
assign analog
inputs to
SupplySpeed
and
ExhaustSpeed
.
WRF–P, CPM–P
– fan speed control is in the range of 0-100% from the WRF04 or CP-
M-B controller. In the
Configuration
menu, there it is necessary to set
TypeControl
=
Press
for both fans and then in the
AssignmentInputs/Outputs
Fans
menu to assign the analog inputs to
SupplyPress
and
ExhaustPress
.
WRF–F, CPM–F
– fan speed control per the required flow from the WRF04 or CP–M–
B controller. In the
Configuration
menu, there it is necessary to set
TypeControl
=
Press
for both fans and then in the
AssignmentInputs/Outputs
Fans
menu to assign analog inputs to
SupplyFlow
and
ExhaustFlow
.
3xSpeed
– in
AssignmentInputs/Outputs
ModeSwitches
, there three digital inputs
for switching fan speeds are displayed, and their specific values can be set in