Ref.: MEL-WA(3D HCV) - OM Ver.1.7
61
7.4.4.2.
REAR WHEEL PARAMETERS
By pressing REDO ALIGNMENT button, complete alignment
sequence from
Wheel runout
screen can be repeated
Truck with
2 Front axles & 3 Rear axles
Truck / Bus with
1 Front axle & 1 Rear axle
Car with
1 Front axle & 1 Rear axle
Fig. 105
In this screen, Live readings of Rear wheel (Rear 1
st
Axle
– B2)
Camber, Toe & Total Toe will be displayed.
Press
ADDITIONAL PARAMETER
button to view the Track width
difference as shown in the following screen.
Fig. 106
The Track width difference will be displayed as Positive angle, if the
Rear Track width is more than the Front Track width and as negative
angle if the Front Track width is more than the Rear Track width.
7.4.4.3.
FRONT WHEEL PARAMETERS
By pressing REDO ALIGNMENT button, complete alignment
sequence from
Wheel runout
screen can be repeated
For adjustment of Front Total Toe, follow the On-screen instructions:
Fig. 107
