Ref.: MEL-WA(3D HCV) - OM Ver.1.7
118
7.6.2.
MEASUREMENT UNITS
This option is used to change the measurement units like
“degree min" /
“degree” / “mm" / “inch” and other angles in “degree” / “degree min”, “kg” “lb”.
Fig. 206
7.6.3.
ALIGNMENT DATA
This option is provided to view the results of a particular job to analyse /
trouble shoot.
Fig. 207
7.6.4.
WORKSHOP INFORMATION
This Option is used to enter the Customer Name and address of the Alignment
Centre and password settings. Customer can also add Logo of their Service
centre to appear on the top left corner of the printout. Also, option is provided
to add the Distributor Logo which will appear at the bottom of result printout.
Fig. 208
Preparation of Logo (Size: 200x60):
Locate the Logo file in the Desktop of wheel aligner PC.
Right click the Logo file and choose “Open with” option.
Choose “Paint” application from the list.
Select “Resize” Option from the
Home
menu and choose
“Pixels” as resize method. Disable (uncheck) the “Maintain
aspect ratio”.
Provide “200” as Horizontal dimension and “60” as Vertical
dimension in the respective window.