Ref.: MEL-WA(3D HCV) - OM Ver.1.7
47
7.3.
MAIN MENU
When the equipment is switched ON, Windows Operating System will boot up and then
the system will initialize all the devices. Execute the Aligner software from the desktop.
A
Welcome
screen will be displayed with following options:
Fig. 73
START
To conduct Wheel alignment program as per the axle configuration is
selected. To conduct Four wheel alignment. First, existing condition of
Rear wheels will be measured and displayed. Then Rear wheel
parameters are corrected & Thrust angle is compensated in Front Toe
during Front wheel alignment. Here, the drive axle is taken as reference.
It reduces Tyre wear & improves vehicle performance.
Refer Chapter 7.4
SETTINGS
To go to
Special options
. Special Options is to perform all system
related activities, such as Vehicle specification entry etc. Since this a
critical function dealing with alignment specifications, etc., a Password
(Default password: supervisor) is given to the customer to access
Special options. Normally this Password must be kept as a secret by a
responsible person, say the Owner of the Shop. If by chance the
Password has come to other‟s knowledge, a Password modification
provision is also given, using which the owner can change Password.
Refer Chapter 7.6
HELP
On-line help. This option can also be selected by pressing
F1
key
Online help can be accessed from all the screens by pressing
F1 key to guide the user while performing alignment and to
know about the active keys available in that particular screen
LANGUAGE
To enter into Language settings
SETTINGS
User can select the preferred language out of available options so as to
display alignment screens in their regional languages.
Refer Chapter 7.7
DATA
To enter into Data Manager Program
MANAGER
Data manager is smart customised software for monitoring condition of
various vehicles aligned by the equipment and the performance of the
Wheel alignment centre on the whole.
Refer Chapter 7.5
SHUT DOWN
To Shut down the aligner program & PC
To avoid damaging important files, it is necessary to shut down
Windows properly before turning OFF or restarting the aligner
