Ref.: MEL-WA(3D HCV) - OM Ver.1.7
60
7.4.4.1.
THRUST ANGLE ADJUSTMENT
Press
NEXT
button to view & adjust the Thrust angle & the tilt
direction of Axle. By feeding the distance of the Spring plates or Track
width, the amount of the movement towards the direction will be
indicated. Now adjust the Thrust angle to 0° as per On-screen
guidance & as explained below:
Truck with
2 Front axles & 3 Rear axles
Truck / Bus with
1 Front axle & 1 Rear axle
Trailer with 3 Axles (Forward parking)
Trailer with 3 Axles (Reverse parking)
Car with
1 Front axle & 1 Rear axle
Fig. 103
Fix the Screw jack in between the two Axles as shown above.
Loosen „U‟ bolts on B2 Axle using Power tools & raise Screw
jack in such a way that B2 tyre is pushed as shown above.
Push the wheel until the thrust angle reaches zero or within the
tolera
nce. Now tighten the „U‟ bolts firmly using Power tools.
Fig. 104
Press NEXT button after adjustment of Thrust angle