Ref.: MEL-WA(3D HCV) - OM Ver.1.7
115
7.6.
SETTINGS
You can enter into this Option by clicking
SETTINGS
in the
Welcome
Screen and by
providing the Password.
Fig. 202
The following Menu will be displayed:
Vehicle
specifications
Ref. Chapter 7.6.1
Measurement units
Ref. Chapter 7.6.2
Alignment data
Ref. chapter 7.6.3
Workshop
information
Ref. Chapter 7.6.4
Calibration history
Ref. chapter 7.6.5
Multi-user
Ref. Chapter 7.6.6
Backup & Restore
factory calibration
Ref. chapter 7.6.7
Reset Job number
Ref. Chapter 7.6.8
Settings password
Ref. chapter 7.6.9
Refer Service
manual for other
Settings
7.6.1.
VEHICLE SPECIFICATIONS
The Vehicle specification data must be entered by End user only.
MANUFACTURER IS NOT RESPONSIBLE FOR ANY INCORRECT OR
INCOMPLETE VEHICLE SPECIFICATIONS ENTERED / AVAILABLE IN
THE SYSTEM. No claim is entertained for any damage or loss
Vehicle data can be exported to User data for modifying the data while
doing alignment for customised vehicles
Fig. 203
7.6.1.1.
INTERNATIONAL HCV DATA
The readily available vehicle specifications that are compiled and
released by Third parties with License can be directly uploaded in our
system. These vehicle specifications are updated & released twice
every year at extra cost. These data are non editable but the User
can select the required vehicles from the list & export it by pressing
EXPORT TO USER DATA
button to User data for edit & customizing
the specification.
