Ref.: MEL-WA(3D HCV) - OM Ver.1.7
105
7.4.5.47.
ARTICULATED BUS
– 1 Front Axle & 2 Rear Axles
Reverse parking alignment is not possible for Articulated
buses & can be done only in Drive through model
Park the Bus on a straight line by ensuring the Front (F1) axle is at 2.8mtr
from Camera in 1
st
Rotary plate
1. Mount Front (F1) Target plates with
Front 1
st
axle (F1)
2. Mount Rear (B1) Target plates with
Rear 2
nd
axle (B2)
3. Carryout Push-Pull Runout by driving
vehicle (Ref. Chapter 7.4.3)
4. Carryout Caster / Kingpin swing for F1
(Ref. Chapter 7.4.4)
5. Carry out measurement as guided by
the screen
6. Apply Steering lock at straight ahead
position (F1)
7. Adjust Rear 2
nd
Axle (B2)
Adjust Front 1
st
Axle (F1)
Park the Rear 2
nd
axle (B2) in 1
st
Rotary plate
8. Remove Front (F1) Target plates from
Front 1
st
axle (F1) and mount it with
Rear 2
nd
axle (B2)
9. Remove Rear (B1) Target plates from
Rear 2
nd
axle (B2) and mount it with
Rear 1
st
axle (B1)
10. Carryout Push-Pull Runout by driving
vehicle (Ref. Chapter 7.4.3)
11. Carry out measurement as guided by
the screen
12. Adjust Rear 1
st
axle (B1)
For adjustments refer Chapter 7.4.5
2.8 MTR
7 MTR
2.8 MTR
7 MTR
B2
F1
B1
B2
F1
B1
