Ref.: MEL-WA(3D HCV) - OM Ver.1.7
40
The steel rope will be tied to any of the rear axle (ideally drive axle) and the
winch will be operated. The winch will pull the vehicle backward. To move the
vehicle forward direction, a pulley with shaft mechanism installed on the pit
(next to the F2 Rotary plate) will push the vehicle forward.
Note: To operate the winch, customer should have 12Volts/100AH battery and
suitable battery charger this battery.
Fig. 62
6.10.17. EARTHING ROD
Earth rod is provided to interface the product to ground in all soil conditions in
order to achieve satisfactory earthing systems in overhead and underground
electricity distribution and transmission networks.
6.10.18. PRINTER
A Printer option is provided with the equipment for printing the alignment
reports in ISO A4 size paper. The User is provided with options for printing
the alignment reports in Ordinary or in 3D Graphical format as per the
requirement.
If Laser printer is used with the equipment, the AC power should be
given separately for the PRINTER. If the panel output is used, the
FUSE will blow.
Use only original ink cartridge, by indicating the respective Cartridge
Model No., Printer Make and Model No. to the supplier. Failing to
comply may lead to Printer head damage / improper printout
Use only standard ISO A4 size papers (210 x 297 mm) recommended
by the Printer manufacturer and always ensure sufficient quantities of
paper is loaded in the Printer tray. Failing to comply may lead to
Improper printing / Paper jam / Printer head damage
Clean the Printer with a soft & clean cloth using water and then
remove moisture from the surface quickly. Long term exposure to
moisture may damage the surface
Location of Indicators and Control buttons may change depending
upon the make of Printer supplied. Refer Printer manual / Soft media
6.10.19. MULTIMEDIA SPEAKER
Multimedia speakers (2 Nos.) are used for providing voice prompts to guide
the operator throughout the alignment program.
Location of Indicators and Control buttons may change depending
upon the make of Speaker supplied. Refer Printer manual / Soft media
6.10.20. INTERNATIONAL VEHICLE DATA
(refer scope of supply)
This is an Optional feature to be activated via Built-in Hardware lock by
purchasing at extra cost. The readily available vehicle specifications that are
compiled and released by Third parties with License can be directly uploaded
in our system. These vehicle specifications are updated & released twice
every year at extra cost